ProScan Pipeline System

ProScan Pipeline System – Inline Detection and Rejection

ProScan Pipeline System
  • Monitors interference attributed to vibration and automatically compensates for its effect, thus defending the ProScan System’s reliability without reducing detection levels
  • The non-conductive product flow tube is designed to withstand pressure and high temperatures
  • Enhanced power supply defends the metal detector’s performance and reliability in spite of electrical power line spikes and dips
  • IP69K rated wash down construction for high pressure and extreme temperature wash down conditions
  • A three-way sanitary divert valve with tri-clover fittings is used to automatically reject metal contaminated product
  • Metal detector, product flow tube and reject device are sized to meet your throughput needs
  • Acculearn technology product characteristic assessment – for rapid product set-up and changeover
  • Password protection for additional security
  • Adjustable RF protection blocks interference from radiated noise
  • Available in floor mounted or elevated positions

The ProScan Pipeline System is built to your application specifications and sized to meet your specific needs. Get the ProScan Pipeline System by calling us today at 414-672-0553!

The ProScan Pipeline System comes installed with our ProScan Core Technology Software

ProScan Core Technologies

AccuLearn Technology
Setting up products with the Acculearn technology is easy and efficient.  In as few as 1-2 passes, the metal detector will learn your product’s signature, allowing clean product to pass through while accurately identifying and rejecting products that have metal contamination.

Patented Vibration Technology
ProScan vibration technology monitors interference created by vibration and automatically compensates for the effect, thus enhancing reliability and sensitivity.

Patented Auto Balance
Advanced Detection Systems’ auto-balance software maintains perfect coil balance and optimum performance, eliminating the cost of a service technician plant visit to re-balance the metal detector.

Advanced Detection Systems ProScan Pipeline System is designed to fit into your existing plant’s pipeline process. Our metal detector experts will use our product testing service to provide you with reliable, state of the art detection levels for your specific application.

Advanced Detection Systems’ wash down enclosure design is the best in the industry!

Our ProScan Pipeline System is rated IP69K for sealing of the electronics and extreme wash down conditions. We designed the ProScan metal detector series to withstand high pressure wash down environments. The ProScan Pipeline System is preferred by food processors because it prevents water from getting into the coil, which is encapsulated with waterproof material. Stainless steel housing is embedded into PVC at a 90° angle – unlike other detectors where water can seep through a vertical seam – resulting in costly repairs. The welded construction and stainless steel components are designed to provide many years of reliable performance. The seams are sealed under pressure using extra mounting bolts. The sealant acts as a pressurized gasket to form a superior seal against harmful water ingression. We included an impact resistant touchscreen cover. The metal detector can withstand close range wash downs at an average rate of four gallons per minute with water pressures between 1160 – 1450 psi and at a temperature of 176°F.

ProScan Pipeline System Wash Down IP69K Construction Features:

IP69K Wash Down Definition:
IP= Ingress Protection (the degree of protection provided by the electrical enclosures)
6= Dust Tight
9K= High Pressure/High Temp Spray Down

ProScan Pipeline System Reject Devices and Accessories

Advanced Detection Systems’ engineers are experts in metal detection. We manufacture superior reject devices and accessories to meet your application requirements. Any reject device and accessory can be customized or designed to your specific needs.

Reject devices are used to allow the customer to remove contaminated product and still maintain normal product flow without halting production. The use of a reject device also allows the company to avoid relying on the employee to remove the contaminated product from the line.

Having a reject device for your ProScan Pipeline System is important. The reject device will prevent contamination, protect your customers, provide a stellar reputation of your product (brand name) and protect your profits. The product or the package of the product will determine which type of reject would be best for the application.

How to determine which reject device is appropriate for you?

The ProScan Pipeline System uses a diverter valve for its reject device, which can be customized to fit your specific needs.

Diverter Valve

Metal Detector - ProScan Pipeline System

Diverter Valve Reject Device

External Remote Control Cabinet – The external remote control cabinet is an optional accessory used when the ProScan Pipeline System is placed in a difficult to read position in your production stream.

External Remote Control Cabinet

Pipeline System
Pipeline System

Reliable and Consistent Metal Detection

Contact us today to discuss your specific needs! 414-672-0553   |

Industry Member

PMA Fresh Summit
American Association of Meat Packers
The Association for Packaging and Processing Technologies
Midwest Food Products Association, Inc.
Wisconsin Cheese Makers Association
National Stone, Sand & Gravel Association